Automatic Tank Level Gauge is float operated unit for accurate measurement of liquid level in fixed roof & floating roof tanks at pressure up to 14.5 psig. Download Literature in pdf format.

ACCESSORIES

• 90O Elbow / 135O Elbow.
• Tape piping.
• Gauge head mounting bracket / pipe mounting bracket / anchor / guide wire assemblies.

OPTIONS

• Inspection Hatch - in absence of manhole cover.
• Flexible Tank Entry - to compensate roof movement inaccuracy of cone roof tank.
• Floats - standard float / interface float / reinforced float / low immersion float.
• Crank-up Mechanism - for hoisting the float.
• Liquid Seal - to prevent vapour losses & protect from corrosive vapours to enter in gauge.

ACCURACY

By using a float having a large horizontal area to reduce immersion, the effects of variations in relative density are negligible. Bearings exposed to tank vapours are in PTFE to ensure minimum errors due to friction. The level may be read to the nearest millimeter & when correctly installed, this gauge is acceptable for custody transfer in most parts of the world.

REMOTE TRANSMISSION

The gauges can readily be fitted with any of our flame proof or intrinsically safe level transmission systems. High, low & intermediate alarms can be fitted to these gauges, either as a separate unit or included in any level transmitter.

ORDERING INFORMATION

Please furnish the following information:

• Height & type of tank.
• Product stored, including temperature & pressure.
• Mounting arrangement required.
• Alternatives & additions to standard specifications.
• Dimensions of non standard features.
• Supply of gauge / accessories or both.
• Scope of installation work.